Get Started Field Trip!!!!!  Wind Power Cool Attic Power Factor Energy Cost 

 

Spin your meter backwards
Skystream 3.7

Customer Testimonials

Skystream 3.7 Customer in Caddo Mills, Texas
Skystream 3.7 Customer in Krum, Texas
 
Skystream 3.7 Customer in Corsicana, Texas
Global Warming

MEDIA
Skystream 3.7 and WBAP Radio
Skystream 3.7 Fox News
WeKnow We Know Technologies

WeKnow Technologies - 5005 S Peachtree Rd Mesquite, TX 75180
 Google Map (click here)

Get Started Wind Power Cool Attic Power Factor Energy Cost About Us Contact Us

WeKnow Technologies.
Copyright © 2008 [WeKnow Technologies]. All rights reserved.
Revised: 08/17/08.
 

Skystream 3.7

$5,150.00
33’ Monopole $2,600.00

45’ Monopole

$3,700.00

55’ Monopole

$4,600.00
Mat Foundation COMPLETE KITS!  
J-Bolt Kit ($450), Steel / Rebar w/ Seats & Ties ($350)- for 33' Tower $800.00
J-Bolt Kit ($450.), Steel / Rebar w/ Seats & Ties ($400.) - for 45' Tower $850.00
J-Bolt Kit ($450.), Steel / Rebar w/ Seats & Ties ($400.)  - for 50' Tower $850.00
TOWER KITS  
Gin Pole Kit - Includes Gin Pole, Shackles and Wire $300.00
Hinge Plate Kit- Includes hinge plate and hardware $289.00
Optional: Self Install Training - Day Rate $300.00

 

HOW TO PLACE A WIND TURBINE ON YOUR PROPERTY!

EVERYTHING THE DO-IT-YOURSELF PROJECT NEEDS! CLICK HERE!

The new Skystream 3.7 Residential Wind Turbine installed on a  monopole (Engineering standard for street lights and signs and designed for 140 mph winds) designed to last over 20 years and developed in cooperation with the U.S. Department of Energy has changed everything!  Visit Southwest Windpower for more information!

We feel obligated to inform you of the pitfalls of the DIY Process: We do not want to discourage you!  We just need to cover any liabilities we may have as the equipment provider. 

  • Risk of voided manufacturer warranty. - Improper installation will void warranty!
  • Risk of injury or death - This is heavy construction! Many failure points!
  • Risk of foundation failure - Concrete is a science, requires training and experience
  • Risk of non-producing installation - Wind Turbine installation requires training and experience. Self install or unprofessional installation will result in very poor energy production. This is not a tree or street light!!!
  • Risk of seeing your turbine on the ground - We had one person purchase a very old 30' radio tower. Tower must be engineered to support the Skystream 3.7 Wind Turbine in the worst possible wind conditions.
  • Risk of improper wiring! You can damage your turbine, void the warranty, burn down your house and lose power from improper wire sizing. Our installation is performed by a licensed and insured master electrician, per the national electrical code and manufacture requirements. That is how we do it with or without permit requirements.
  • Risk of not making the purchase as as result of poor information - This is a REAL BIG ONE! Power curves and Wind Maps can provide VERY poor estimates.  You will need professional help here!
  • Risk  of thinking you can not afford it. What are you going to do with all the savings!  FREEDOM at pay off! You just put a cap on increasing electric costs or removed it all together!
  • Risk  of never getting around to it!  This is a major project that requires large equipment and more man hours than most people have available. Your meter will never spin backwards if you don't get started!

Do we sell equipment for installation in other states?  It depends on market conditions.  If you do not have a qualified local dealer in your area, then we would be happy to provide you with equipment. Southwest Windpower has just posted a new dealer map that does not function well.  If you can not locate a dealer or have not been contacted by Southwest Windpower (Eye of the hurricane) just drop us an email.  We will be happy to help! windpower@weknow.net