Low price and
professional installation... means fast return on investment!
Why pay a
utility bill forever?
INSULATION ENERGY SAVINGS! If you can see the tops of your ceiling joist (boards) then
you need insulation. The
U.S. Department of
Energy recommends R-38 - R-49 for the Dallas/ Ft. Worth area.
Heating / Cooling Savings as HIGH as 30% (18” FIBERGLASS OR
12” CELLULOSE). Most Texas cities only require R-30!
Insulation
Slows the transfer
of conducted and convected heat. If you have 5 INCHES (R-11)
GO TO R-49 with 18 INCHES TOTAL You can
"SAVE UP TO 30% PER YEAR"
If you do not have a
Radiant Barrier (found in
most new homes), then your attic is not
protected from radiant heat. RADIANT BARRIER
SAVINGS AS HIGH as 10-15% During the
winter 50-75% of heat loss is
through the ceiling and roofing system.
During the summer up to 93% of heat gain is radiant. A
radiant barrier reflects radiant heat energy instead of
trying to absorb it. What does this mean in your home or
business?
If you are using just insulation (resistance) against heat
gain and loss, you have loss half the battle. Standard
forms of insulation are virtually transparent to radiant
energy and are affected by changes
in humidity. A change as little as ½ % in the moisture
content of fiberglass insulation can result in a 36%
performance failure.
charles crumpley
Jeff Hatch
imperial Electric
Weknow technologies DOE
wind Research
windmill
wind generator
winddriven
wind turbine
electric
windpower
power
energy